RoiPac

From GeodesyLab
Revision as of 01:07, 3 July 2008 by Yuning (Talk | contribs) (Usually, there are three steps to finish Interferometry SAR processing with ROI_PAC.)

Jump to: navigation, search

Our lab has installed ROI_PAC 3.0 for SAR and InSAR processing. Some detailed introductions and explainations will be followed soon. And also, you can get information about InSAR and ROI_PAC from the links below.

http://roipac.org/

http://www.uoregon.edu/~das/WikiRoiPac/doku.php?id=welcome

ROI_PAC

ROI_PAC is located at /usr/local/ROI_PAC_3_0, and there is also SAR data available for your test at /usr/local/TEST_DIR directory. More information about how to play with it will be updated soon.

Usually, there are three steps to finish Interferometry SAR processing with ROI_PAC.

Take the test data (/usr/local/TEST_DIR) for example to explain the processing.

First, compile some environment variable and path used by ROI_PCA. There is already a template file named SAR_CONFIG at /usr/local/ROI_PAC_3_0/ROI_PAC. Change the necessary commands, and then "source" in.

 source SAR_CONFIG


Then, ingest the data. Go to the SAR data directory (/usr/local/TEST_DIR/930110 and /usr/local/TEST_DIR/950523), and ingest data respectively.

 TEST_DIR/930110> make_raw.pl PRC SARLEADER1993011018252739T1Of1 930110 
 TEST_DIR/950523> make_raw.pl PRC SARLEADER1995052318253409T1Of1 950523 

Note: Different SAR data format has different commands to ingest. For our case, they are ERS data, so "make_raw.pl" is used.

Last, data processing. Actually, there is a command "process_2pass.pl" can run all the steps after raw data ready. And the file "int.proc" in main directory (/usr/local/TEST_DIR) specifiles two scene directories (data and orbit) and other processing parameters for a given interferogram.

 process_2pass.pl int.proc

And also,